Black Lab RCA

Interkonekt audio subwoofera niskiej częstotliwości

Connect amplifiers, receivers, soundbars, and AVRs to a broad range of subwoofers with this AudioQuest Black Lab RCA subwoofer cable. Solid Long-Grain Copper
(LGC) conductors minimize distortion, Foamed-Polyethylene preserves dynamic contrasts, and a Metal-Layer Noise-Dissipation efficiently dissipates high-frequency noise. The result is clearer, naturally beautiful music, intelligible dialog, and thrilling sound effects.

$51.95 USD
SKU: BLAB02  |  UPC: 092592078895

Key Features & Technology Explained

  • Solid conductors prevent strand-interaction, a major source of dynamic distortion in cables.

  • High-purity Long-Grain Copper (LGC) conductors minimize distortion caused by grain boundaries.

  • Metal-Layer Noise-Dissipation shields noise effectively, absorbing and reflecting most RFI before it reaches the ground layer.

  • Foamed-Polyethylene's high air content minimizes energy absorption for clearer sound.

  • All conductors controlled for RF-noise directionality.

Specifications

Description

    Solid Long-Grain Copper (LGC) Conductors
    Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

    Metal-Layer Noise-Dissipation
    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    Foamed-Polyethylene Insulation
    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

    Symmetrical Coax Geometry
    Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

    Cold-Welded, Gold-Plated Terminations
    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

Black Lab RCA - BLAB02-2 m = 6 ft 6 in
AudioQuest

Black Lab RCA

$51.95 USD

Noise Dissipation

Metal-Layer

A/V Conductor

-

eARC Conductor

-

Ground Reference

-

-

Geometry

Symmetrical Coax

Gauge

-

Metal

Solid Long-Grain Copper (LGC)

Pair or Single

Single Cable

Series

Black Lab

Speaker-End Connector

-

Amplifier-End Connector

-

-

-

-

Output

-

DAC Chip

-

Volume Control

-

Desktop Compatibility

-

Mobile Compatibility

-

Application Options

-

-

Included Adaptor

-

Dimensions

-

Cable Length

  • 2 m = 6 ft 6 in
  • 3 m = 9 ft 10 in
  • 5 m = 16 ft 5 in
  • 8 m = 26 ft 3 in
  • 12 m = 39 ft 4 in
  • 16 m = 52 ft 5 in
  • 20 m = 65 ft 7 in
View product